Optical production: from design to series production of optical systems

2 November 2021

Among the services offered by Arlumen, optical and photonic production occupies an important place, since it enables the design, prototyping and industrialization work carried out upstream, at Arlumen, or at the customer's premises, to be put into practice. To ensure that this stage of production is efficient and of the highest quality, Arlumen focuses on preparation, traceability, production conditions and the training of the technicians in charge.

A structured process for the production of optical systems

Arlumen's teams work on two types of optical production process: either in response to a specific request from a customer who wishes to entrust only the production of its optical equipment, or because this production is part of a more global project handled by Arlumen and including this production stage.

But before actual production can begin, a preparatory phase is necessary with the customer. For each series to be produced, this enables an efficient transfer of knowledge and manufacturing files, and the drawing up of production specifications. During this essential stage, Arlumen teams identify the best compromise between robustness, performance and price for each optical system to be produced. They also define certain key elements for production:

  • Choice of suppliers and procurement methods
  • Drafting procedures and operating modes
  • Assembly and adjustment benches
  • Definition of test reports for the customer
  • ERP configuration, to manage the quality and traceability of components and optical systems.

Before launching final production of optical equipment, Arlumen teams first work on a pre-production run. This pre-production run serves several purposes: firstly, it defines a manufacturing reference in relation to the specifications defined with the customer. It also enables us to identify any technical difficulties or unforeseen problems in the production of optical systems that may not have been identified at the end of the prototyping phase. In such cases, new iterations of technical preparation are then organized with customers, until final validation of the pre-series.

Complete traceability of all optical production processes

The production of optical systems at Arlumen follows a series of stages, each of which is subject to specific planning. Arlumen uses a custom-developed ERP system, which provides the production team and customers with complete traceability of the entire production process:

  • Supply management
  • Production orders
  • Component inventories
  • Quality control
  • SERVICE
  • Metrological monitoring of equipment
  • Performance and results indicators (reliability of schedules and forecasts, scheduled production, average production time per product, scrap rate, etc.).

A test report is drawn up for each piece of equipment installed, validating the expected functionality and compliance with the specifications.


In this example, the mounted lenses (shown in gray) are identified by a unique number.

Production areas adapted to confidentiality and cleanliness requirements

Depending on customer needs, the optical equipment production team can adapt the premises to meet confidentiality or cleanliness requirements. In fact, Arlumen has several specific, modular benches or production lines, in assembly rooms specialized in photonic systems. The assembly of more sensitive optical equipment is carried out in one ofthree 25m² ISO 6 clean rooms, equipped with ISO 5 laminar flow hoods. To meet confidentiality requirements, these rooms can be dedicated to a single customer, with access restricted to authorized personnel only.

Arlumen also has the capacity to store supplies and finished products to meet the needs of each of its customers.

Modular according to series, the optical component assembly room is fully equipped for production start-up.

salle-blanche-evosens-equipements The production team has several ISO 6 cleanrooms at its disposal, to guarantee production in a dust-free environment.

Complementary know-how for optical production

Arlumen's expertise in optical, mechanical and electronic design makes for greater efficiency in the production of optical systems. The experience acquired in R&D work can also be transferred to production when necessary. To this end, the optical production team uses conventional optical instruments: video acquisition systems, binoculars, spectrometers. It also develops specific tools dedicated to production runs, such as adapted measurement benches or specific software mobilizing the most advanced optical technologies, notably wavefront analyzers.

Arlumen uses Interferometry software for phase measurement during the production stages of optical equipment.

For mass production, Arlumen has designed a binocular laser diode centering bench.

Produce optical or optronic teams, from a few units to several thousand units

Arlumen's optical and optronic systems are manufactured by qualified technicians who take charge of the entire production process, from sourcing components to delivering products to customers. The optical series produced by Arlumen range from a few units to several thousand. The optical technicians mobilized for production are trained at the launch of each series, to guarantee agility and responsiveness in the manufacture of optical equipment.

Arlumen's optical production team designed and assembled 1,000 LED lighting units to replace the majority of marine lighthouses equipped with halogen lamps.

Installation of optical detectors: 10 per year

Assembly of optical heads for cleanroom microscopes: production of around 10 systems per year

Installation of optical detectors: 10 per year

Fluorescence sensors: 30 installed each year

Discover also

Optical imaging: capturing and observing images, from microns to light-years

The Arlumen Photonics and Optics Summer Workbook!

Do you have a photonics project?